December 17, 2017

Major Chords VST3

MAJOR CHORDS is a new VST3 guitar sampler for Steinberg HALion Sonic developed by Steve Stroud at Big Cloud Productions.
It can be used in HALion Sonic either in the stand alone player or as a VSTi plug in within your DAW session. So now in Cubase, Reaper or any DAW that will load VST3’s,  you can automate real sampled guitars and basses to play any chord or note anywhere in your track.

If you’re new to Halion Sonic, the two tabs you’ll mostly need to concern yourself with are:

LOAD: Just click MAJOR CHORDS and choose a Preset. (This will load MAJOR CHORDS in Halion. Hit a key to test)

EDIT: This takes you to the Main MAJOR CHORDS screen where you can tweak all the knobs and faders. Here you’ll see that that there are 3 tabs to the MAJOR CHORDS program.

MAIN: This is the main landing page where you’ll see 3 faders, some knobs and buttons. Nearly everything in MAJOR CHORDS has a tooltip, so if you’re unsure about what something does, hovering your mouse over it usually clears things up.

The left side of the screen deals with the Electric Guitar samples, the middle the Bass Guitar Samples and the right the Acoustic Guitar samples. This doesn’t change whatever screen you’re on.

Each instrument also has it’s own volume fader, pan, mute and solo button.
The electric and acoustic guitars have a big knob near the bottom of the page which changes the sample chord type that’s played. ie: Major, Minor, Dim etc..
The bass has a similar knob, but instead of chords it just changes the pickup and tone options of the sampled note.

All these switches and knobs can be automated within your DAW, so you can easily get the guitars playing along with your own songs.
In your DAW session, just right click over any control and scroll to ‘Assign to New Automation’. You can then right click again and choose ‘Show Automation Track’. From there you can edit anything you like.

FX: This takes you to the Effects page. The faders and the mute and solo buttons are still available, but now you have access to overdrives, reverbs, amp types, chorus and delays for each individual instrument. The switch lights up yellow when an effect is activated. The knobs and switches to the right of the switch allow you to dial in as much of the effect as you want.

EQ: The third tab is the EQ page. Each instrument has it’s own designated 4 band EQ. The toggle switch at the top (underneath the mute on solo buttons) is the master EQ on/off switch for each instrument. The EQ is only active if the yellow light on this switch is on.
Underneath are 4 knobs for gain (low, low mid, high mid, high), 4 knobs for the frequency that gain applies to and a Q control.
You can bypass each individual band by pressing the smaller switch above the gain knob. Once the yellow light goes out on this smaller switch the EQ band is bypassed.

 

Features:

*Digital download available immediately after checkout.

*Full install and user instructions are included with the digital download.

*You can create your own custom presets by right clicking the Major Chord program in the Halion program tree and ‘Saving as’.

*Electric and Acoustic Guitar Chords available: major, minor, dim, aug, 2, 7, m7, maj7, dim7, m/maj7,  7+5, 7sus2, 7sus4, 6, m6, 9, -9, m9, m-9, maj9, sus2, sus4, add9, 5(powerchord).

*Bass note options available: 2 humbuckers, neck humbucker, bridge humbucker, 2 singlecoils, neck singlecoil, bridge singlecoil, 2 humbuckers (Tone off), neck humbucker (Tone off), bridge humbucker (Tone off), 2 singlecoils (Tone off), neck singlecoil (Tone off), bridge singlecoil (Tone off),

*Effects available (Individual instruments.):  Steinberg VST amp modeller (choice of amps), VST amp Drive, Steinberg Reverence, convolution based Reverb, Reverse Reverb, Steinberg Stereo Chorus, Steinberg Stereo Delay (choice of delays).

*EQ available: (Individual instruments.) Steinberg 4 band Studio EQ (each instrument has its own 4 band EQ with gain, freq and Q controls)

*Controls available:  (Individual instruments.) Volume, Pan, Mute, Solo.

*On your midi keyboard, C3 is where the original note/chord that was sampled for each instrument was played. Playing around the 2nd and 3rd octaves will get you realistic guitar sounds, but I’ve left the keyboard octaves wide open so you can play as high or as low as you like for experimental sounds.

*Electric Guitar: Gibson Les Paul Standard (2 humbuckers, middle position) into Kemper JN Fender 59 Bassman
*Bass Guitar: Gibson EB14 (2 humbuckers, all positions sampled) into Kemper Amp Pig Cln
*Gibson J45 Standard (AKG 414 through Golden Age PREQ-73)

*To play MAJOR CHORDS you’ll need either Steinberg Halion, Halion Sonic or Halion Sonic SE (free)

*Below is a link to get your FREE Halion Sonic SE 3 player.
https://www.steinberg.net/en/landing_pages/halion_sonic_se_3/halion_sonic_se_free.html

Major Chords created by Steve Stroud ©2017 with Halion 6

Introductory price ONLY £25

Posted by in and tagged as